Engineered & made in the UK since the 1960s  ·  Worldwide representative network  ·  Up to 95% water savings

Guide

Chemical & product carriers

How product carriers differ from crude tankers, and the Dasic equipment used on them.

Product carriers are more sophisticated than crude oil tankers because they carry different types of cargo. Dedicated product carriers have coated cargo tanks that are easy to drain and clean and that protect the cargo from contamination.

They tend to be smaller than crude tankers and are mainly used in short-haul, intra-regional product trades, where their size and flexibility allow higher utilisation. Larger Panamax and Aframax product tankers are increasingly used on long-haul routes from the Middle East to take advantage of economies of scale.

ClassDeadweight (DWT)Notes
Handysize10,000–30,000Small tankers mainly carrying finished petroleum products
Handymax30,001–50,000A larger version of Handysize, popular for product carriers
Panamax50,001–80,000The largest ships able to pass through the Panama Canal locks
Capesize80,001–199,000Too large for the Panama or Suez locks, so travel via the Cape of Good Hope or Cape Horn

Dasic equipment for product carriers

  • Portable tank washing: D3000, D4000, Orbitor
  • Fixed installation: Orbitor, D3000, D4000
  • Gas freeing fans: Jetfan 70, Jetfan 65
  • Anti-piracy water cannon: Nemesis 5000

Chemical tankers often wait for cargo tanks to dry after cleaning. Jetfan 65 fans with hoses and flexible ducting have halved that drying time on Stena’s chemical tanker fleet.

Dasic equipment for this application


Not sure which machine fits? Tell us about your vessel and we’ll recommend a set-up.

Not sure which machine fits your tank?

Answer a few questions about your vessel and cleaning conditions and we’ll point you to the best-fit options.

Talk to an engineer

Tell us about your tank. We’ll recommend the right set-up.

Share your vessel size, access opening, residue and available pressure. Our engineers will come back with the right machine, nozzles and configuration for your application.

  • Machines configured to your pressure, flow and cycle time
  • Designed and built in Chandler’s Ford, Hampshire
  • Supported worldwide through our representative network

Send us an enquiry

The more you tell us, the more accurate our recommendation.

Speak to our engineers

Tell us about your tank, vessel or application and we will recommend the right set-up.